The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However, if you have double-pane windows that are anchored by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case you'll need find some plastic spacers that help the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you may think about the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the size of the window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wears out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. You'll first need to close the window and do an initial fitting. The corner joints of the sash should align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to take action if awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window repairs leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how serious the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens with a breeze. They can be easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. Changing a window hinge is an easy procedure, but it is simpler when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for pvc the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused either by opening the window improperly or a faulty installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to provide assistance.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also be disaligned as a result of wear, creating an opening between the frame and sash. If they're beyond repair, it might be necessary to have them realigned. In addition, the interlock could be unbalanced. This is located on the hinge's side and might require to be cleaned. In some instances it might be necessary to replace them.

The next most common cause of draughts is the window seals. These are prone to wear or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is essential to remember that all windows will eventually wear out and it may be cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.