Which Website To Research Saab 9-3 Key Replacement Online

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of steps that are unique to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. Then the transponder is replaced and a key must be purchased.

It is a good idea to rotate your keys so that one does not wear out more quickly than the other. This will also help to keep your keys in top shape.

Replacement Case

The new key fobs do not look like the older saab car key replacement keys. They feature electronic components which make it hard to copy. This has made theft of cars much more difficult than it was just a few years ago. However, it has also made replacing lost keys a comparatively costly endeavor.

Every owner of a 9-3 Saab should have at minimum two working keys. It costs a fortune to replace a lost key because it requires replacing the CIM module, and programming the locking cylinders. Dealers usually charge between $100 and $200 to do this.

There are ways to reduce these costly costs. Some parts dealers will search for the code from a spare key (usually the same one that opens the doors and switches the ignition) and cut a brand new metal key blade for a fraction of the dealer's cost. The key must be exactly the same as the original in order for it to work in your vehicle.

Follow these steps to replace the case. You will need an flathead screwdriver and patience. Using the screwdriver, slowly pull the plastic apart and then separate the emergency key from the case. Once you have the case open, remove the electronic components and place them inside the new case. Make sure you put the correct key and badge back in the case too.

Replacement Battery

The saab 9-3 key fob programming 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This YouTube video from Cyclone Cyd demonstrates the procedure for replacing the battery for the remote fob in just four easy steps. This tutorial will work with any modern Saab key fob. However, the process could differ slightly.

This button is usually placed just below the saab key fob replacement logo on the back of the fob. This button is usually on the back of your fob close to the saab key replacement 9-3 key fob programming [my explanation] Logo. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be sufficient to open the fob case so that you can replace the battery.

After the new battery CR1632 is installed then you can reassemble your remote key fob and then program it to your car. The entire process should not exceed an hour. It is a simple process that does not require any special equipment.

If you lose your key, the procedure will be a bit more involved however it can be done. The dealer will first need to read the VIN of the vehicle and order an alternative TWICE module, as well as a key blade that has the correct unique code. After that, they will be required to cut the replacement key and then program it using an innovative software tool called MDI.

Replacement Key Fob

The key fob is the device that locks and unlocks your car. It has batteries inside. The batteries last for a certain time, and they will eventually expire. This is a typical issue that happens to all cars and the good thing is that you can change the batteries in most key fobs without replacing the entire case. You can purchase replacement fobs from Amazon that include all the electronics already in place, so you'll just pop open the case and replace the batteries in the original case. It is important to remember that you will need to take out the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot in the middle of the case. Move the screwdriver around the case until it will split open, making it easier to remove.

When you are ready to replace the keys ensure you have a spare, since this will cut down your total cost by a significant amount. If you have a spare you can ask the dealer to cut an entirely new key and then program it into your car, which is cheaper than replacing the entire key fob.

It is possible to add a second key to your car even if you don't have one, but it requires some research and work. A second key can cost several hundred dollars and it also requires programming of the car's computer. This can be done by a professional, however it's a costly option for the majority of owners.

Replacement Ignition

The latest SAAB 9-3 has an alarm system that is more sophisticated built on a keycode. This means that if you lose your only working key, replacing it with another one can be very expensive since the car has to have a special computer module added and it must also be programmed to accept an additional key. Dealers can even charge hundreds of dollars to program a new key in the event that they are unable to complete the task.

Dealers will charge you a premium to replace your car's computer (also called the CIM or saab keys replacement twice) if you lose your only working key. Instead we can reprogram the EEPROM of your current car computer, preparing it to accept a second key, which will save you more than 50% of the price you have to pay at a dealership.

If you've been a faithful owner of an 03-11 SAAB 9-3, then you likely know that the ignition key isn't very robust. If your ignition key is not functioning properly, you must look into replacing it. They can become very sticky and the buttons are known to fall off. It's not so difficult as it may seem to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.