That s Better To Peel From The Hot Stamping Film Cold Tear Film Or Hot Tear Dvd Movie

White ink heat transfer holds a wide range of uses, and its technology and effects are constantly being updated. What remains unchanged is once the heat transfer film is hot stamped for your substrate, the film for you to be be peeled off to complete the entire hot stamping process. However, some heat transfer films need with regard to hot-teared, even though some need to get cold-teared. Many customers asks why many .? Which membrane is better?

Today, Let me take for you to definitely have an in-depth understanding of the magic heat film.

Hot-peel film
The main release component hot tear film is wax, offers poor ink absorption performance and small letters basic to to fall off, but the surface becomes brighter after it is completely cooled.

After the stamping is transferred to your fabric the actual ironing machine, it is torn off while is actually possible to hot, saving waiting available free time.

Tear it within 9 seconds after turning through the press (ambient temperature 35°C), or tear it off when the film surface temperature is greater than 100°C.

If not peeled off in time, the cooling glue will stick to the clothes, causing the clothes and film to tear besides. There may be problems such as pattern deposits.

Cold peel film
The main release component the cold tear film is silicon, which has good product stability and a matte effect after thorough cooling.

Transfer first, cool down (below 55 degrees Celsius) and then gently stem the film, otherwise there is a high risk of tearing off the hot pattern.

In case you loved this article and you want to receive more info concerning DTF Printing Machine (bolinpaperscenter.com) kindly visit the web-page.