14 Cartoons About Patio Door Lock Repair To Brighten Your Day
patio door lock repair Door Lock Repairs
Over time, patio doors undergo wear and tear that could lead to locks that fail. Fortunately, there are several easy and efficient steps that can help restore your uPVC patio door's security.
These quick fixes can make your home safer, whether you realign the lock or clean the mechanism.
Clean the Lock
While patio doors are a great option to let the outside in and keep the elements out, they can also be an issue for security if your lock isn't working as it should. Over time wear and tear cold and hot weather dirt and debris can take their toll on your patio door's lock and cause it to become difficult to open. Fortunately, with a little maintenance you can ensure that your patio door glass repair door's locks will always perform properly.
It's important to first clean the patio door repair door lock and all moving parts. This will help flush out any accumulated grime and coatings that could hinder the lock from functioning in the way it should. Begin by wiping down all the moving parts of the lock for your patio door with a damp, clean cloth. then employ a scouring pad or rough damp cloth to scrub the hard-to-reach parts of the door and frame that are ingrained with dirt. Then, wipe the lock down with a dry towel to remove any remaining moisture. Allow it to air-dry before you use it.
If your patio door has pin-tumbler latches, you can apply powdered Graphite on the key. You can also apply a Teflon oil like WD-40 Multi Use Product. This type of lubricant can be applied easily and will not disintegrate over time. If you're unable to locate the right lubricant for your needs, you could try using a pencil that has an extremely sharp tip. Place the pencil into the lock, and shake it around to spread the graphite.
Regular maintenance is also necessary to keep the tracks of sliding local patio door repairs doors clear from dust, dirt and debris. These tracks are particularly vulnerable to ice, snow, and other particles, which could cause them to block or become stuck. This can make it difficult for your patio door to open and shut.
You can clean the track rails and rollers on sliding patio doors by removing weather stripping that is dirty or damaged. Clean it, then replace it. The rollers of patio doors can be cleaned and sprayed with a nonstick lubricant.
Lubricate the moving parts
uPVC French Doors, similar to sliding patios, are operated using 3 to 4, or sometimes 5 points locking mechanisms. These include the lock cylinder and handle that is operated with keys. These doors require maintenance, the lubrication of moving parts. This can be accomplished using a thin oil (never WD40) and should be done every year.
If hinges that are sagging aren't the cause, the door could be misaligned and catching or rubbing against the strike plate's hole in the frame. The solution is to take off the strike plate and use an abrasive chisel, which will enlarge the mortise it rests in. This lets the latch sit perfectly in the hole, and also prevents scratching or catching on the frame.
Find the diameter of the cylinder using the help of a piece of book or wood that is able to fit into the space above the adjustment screw. The outer dimension is the distance from the outside of the door to the middle of the cylinder, and the inner measurement runs from the center of the adjustment screw until the end of the cylinder.
Verify the width of the lock.
If your patio door latch is difficult to turn even after cleaning and lubricating, it's possible that it's out of alignment with the strike plate hole. Verify that the door is balanced and whether the hinge screws are tight, but in many cases it is possible to move the strike plate up or down can correct the issue.
The latch may not be able to engage properly if the strike of the lock is too small. In this situation you'll need to expand the hole with the hammer or chisel and then test the latch to ensure that it contacts the strike plate in a smooth manner without rubbing against or landing on the frame of the door jamb.
It is important to identify the type of mortise lock you currently are using before you purchase an alternative. This can be done by looking at the faceplate and observing whether it is round or square. Examine each screw hole on the existing lock and note their dimensions. This will assist you in finding a replacement that is the same size and fits perfectly into the hole you have already.
In addition to identifying the mortise lock that is currently in use, you should also examine it for any scratches or bends that may need repairing. A badly bent or damaged latch is more likely than one that has frequently used to break. Replace the lock if it displays signs of damage.
Once you've decided on the kind of lock replacement that you require Now it's time to begin the actual repair. Remove the handle and spindle out of your patio door, and then insert the new one. Begin by installing the interior handle. Align it with the spindle and then secure it in by using two screws or bolts. Once the interior handle is in, install the handle that is outside and screw it in place, too. After you've completed these steps, you can test the new handles to ensure that they open and close easily and that the latch is catching properly with the strike plate.
Check the Door's Strike
The strike plate and door latch are two components which work together to lock the door. If these parts aren't aligned correctly, the latch won't latch the door shut correctly. Fortunately, this problem is often easy to fix.
Examine the holes that receive the strike plate to make sure they are clear of obstructions, such as dirt or plastic plugs. Loosen the keeper screws holding the strike plate in position. This will allow it to move horizontally, but not separate it from the frame. Adjust the strike plate so that it aligns its holes for receiving with latch hooks of the door latch. After the strike plate has been adjusted tighten the screws, and then test the door to determine if it shuts smoothly with the new adjustment.
Door strike plates can be a bit difficult to access for homeowners who have sliding patio door lock repair patio doors, but they're crucial for locking and unlocking your door. The metal plates are typically located on the top and bottom of the door jamb which is where they are used to support the door's latch. The door latch is inserted into the strike plate, and it creates an airtight seal. If the strike plate is damaged or rusted, or if it is not properly installed, the latch may not be able to lock the door properly.
A misalignment between the latch and strike plate is one common cause for the patio lock not to close or stay. The easiest method to check for this is to perform the "lipstick test." Apply some lipstick on the outside of the deadbolt, and then apply masking tape over it. When you close the door, the lipstick will leave a mark on the tape that will show exactly where the latch connects to the strike plate. If the mark is too low or high you can easily alter the strike plate.
If your sliding patio door locks aren't functioning properly they could be a problem in keeping your home secure from intruders. You must repair the issue as soon as possible. Follow these steps to repair your patio door lock and restore it's functionality.