10 Things We All Hate About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is large, you might think about a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. In time, they could be affected by a variety of issues that include sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to unblock the windows to reach the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you aren't able to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's crucial to replace the seal as soon as you can to ensure that your upvc window repairs near me windows remain watertight and secure from draughts.

uPVC handles can also loosen up. Most often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to take action if wake up every morning to find mouldy walls and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer is applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed window repairs glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's easy to change the hinges on a window however it is easier if someone else helps hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The issue can be caused by opening the window repair near me improperly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you advice.

It is also important to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window repair near me.

5. Draughts

Draughts can be caused by different causes. The hinges, also because of wear and tear, could become misaligned. This can cause gaps to develop where the sash joins the frame. If they are beyond repair, it could be required to realign them. The interlock may be unbalanced. This is located on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The second most frequent reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.