Big Chief : Preheating And Connecting The Battery

From MMA Tycoon Help
Revision as of 07:47, 17 June 2024 by UTFPearlene (talk | contribs)
Jump to navigation Jump to search

Using a vape big chief extracts cartridge for big chief weed, the first time is not always intuitive. Below are some simple and clear step-by-step instructions to get you started big chief on the go quad pod how to use and prime a vape big chief extracts cartridge, and to help you avoid many common beginner mistakes.



Step One: Unpackage and big chief cherry pie Prime the big chief vape cartridge big chief extracts cartridge
To start, remove the cart from its packaging and take off the white rubber covers big chief on the go quad pod either end. There should be one cover big chief on the go quad pod the mouthpiece, candyland big chief and another at the base over the coil.

With these pieces removed, if your cart is working correctly, big chief extracts cartridge the oil should seep into the bottom of the chamber and surround the coil. This means it is ready to be primed.



Priming
To prime your cart, big chief thc vape inhale from the mouthpiece several times. There should be no vapor, only air, and the cart should not be attached to a battery. Take between 5-8 "dry hits" in this way, pulling air through the chamber and up into your mouth.

Next, rub the cart between your palms quickly to loosen the oil. If the oil remains above the chamber, big chief on the go quad pod simply continue both priming steps until corrected.

Users often overlook the priming process, but it helps prepare the cart for use, and big chief extracts cartridge will help prevent clogging in the future.



Step Two: Preheating and Connecting the Battery
With the cart primed, the next step is to preheat it by hand big chief thc cartridge or attach it to a battery and preheat the oil.

Here, please be sure you are using a 510-battery that is fully charged. All 3CHI big chief vape cartridge cartridges are designed to be used with a 510-threaded battery. Improper batteries, including MOD batteries, can easily burn or otherwise damage the cartridges.



Preheating
If your compatible battery does not have a preheat button, you will need to preheat by hand. This can be done by rubbing the big chief extracts cartridge between your palms, or by gently and carefully using a blowdryer to warm the oil. Set the dryer to low heat and gently move the mouth up and big chief cartridge down the cart from a distance of approximately eight inches.