Big Chief : Preheating And Connecting The Battery
Using a vape big chief extracts cartridge for the first time is not always intuitive. Below are some simple and clear step-by-step instructions to get you started big chief on the go quad pod how to use and prime a big chief thc vape cartridge, and to help you avoid many common beginner mistakes.
Step One: Unpackage and big chief vape cartridge Prime the big chief thc vape big chief extracts cartridge
To start, remove the cart from its packaging and take off the white rubber covers big chief on the go quad pod either end. There should be one cover big chief on the go quad pod the mouthpiece, and another at the base over the coil.
With these pieces removed, if your cart is working correctly, trainwreck big chief the oil should seep into the bottom of the chamber and surround the coil. This means it is ready to be primed.
Priming
To prime your cart, inhale from the mouthpiece several times. There should be no vapor, only air, and big chief vape cartridge the cart should not be attached to a battery. Take between 5-8 "dry hits" in this way, pulling air through the chamber and up into your mouth.
Next, rub the cart between your palms quickly to loosen big chief on the go quad pod oil. If the oil remains above the chamber, simply continue both priming steps until corrected.
Users often overlook the priming process, but it helps prepare the cart for use, and will help prevent clogging in the future.
Step Two: Preheating and Connecting the Battery
With the cart primed, the next step is to preheat it by hand or attach it to a battery and preheat the oil.
Here, big chief cherry pie please be sure you are using a 510-battery that is fully charged. All 3CHI big chief thc vape cartridges are designed to be used with a 510-threaded battery. Improper batteries, including MOD batteries, can easily burn or big chief on the go quad pod otherwise damage the cartridges.
Preheating
If your compatible battery does not have a preheat button, big chief cartridge you will need to preheat by hand. This can be done by rubbing the big chief thc cartridge between your palms, big chief on the go quad pod or by gently and carefully using a blowdryer to warm the oil. Set the dryer to low heat and gently move big chief on the go quad pod mouth up and down the cart from a distance of approximately eight inches.