Fitting A Cat Flap In A UPVC Door
Allowing your cat to move around the house whenever it wants is an excellent way to keep your pet active and mentally engaged. Having a flap can also aid in reducing toilet accidents by making it easier for your cat to leave the house when it is required to.
Measure the Door
A cat flap allows your pet to come and go as they please without having to open the door for them. This makes it perfect to keep them in the house when you're home or away and helps to keep unwanted pests from the house as well!
It is important to take measurements of the door to ensure you get the right size cat flap. There are various sizes available. This will ensure that you purchase the right size to fit into your upvc door, otherwise, it might be too small or large, and your cat may struggle to use it.
Before you take any action but use a ruler to measure the width of the door in various locations along its edge. Also, take measurements of the door's height in a few spots. This is because doors that are too high could cause your cat to perform the gymnast's routine each time they want to use the flap!
Ask a glazier for help in case you're not sure what to measure for the door. They'll be able to determine whether your door is suitable for cat flaps, and will help you decide on the size of flap you should purchase.
Once you've got your measurements, the next thing to do is to mark the shape of the hole on the door. This will help you when you cut the hole and save you money!
It is also important to ensure that the hole you're creating is in the right place. If you are fitting a cat flap in a upvc door - Read More Listed here, a cat flap to an outdoor door, it's important that the hole doesn't reach too close to the hinges. This could cause leakage or problems with the seal.
If you have a glass door it is best to leave this task to a glazier. It isn't easy to fit a cat-flap into an existing pane. You might also discover that it cracks and loses its weatherproof seal.
Measure the cat flap fitting
A cat flap lets your pet move around as they want, without needing to leave him alone. It can also stop the draughts from entering your house, which aren't good for you or your cat!
If you have a uPVC door or composite, it might be difficult to install a cat flap. These kinds of doors are often made from different materials than traditional wooden or uPVC doors with cat flap and the procedure for installing them is different as well. Before you decide to install a cat flap in your uPVC or composite door, be sure that it's compatible and that you have consulted the manufacturers as alterations may invalidate any warranties.
Generally speaking, these kinds of doors are made to be durable and tough, with insulation built in. This makes them more resistant to elements of the weather than other doors, however they can be difficult to install an animal flap. Get advice from a professional before installing a cat flap onto a uPVC door or composite.
You'll have to measure their height in order to ensure that they can fit through the door. It is easiest to measure their height when they are at peace or asleep, which means they aren't moving around. Once you've established their height, take a measurement of the distance between their stomachs and the floor to determine where the bottom of the cat flap needs to go. You can then mark this location on the door.
If you are using power tools to cut your composite or uPVC door, you will need be cautious. Drilling into metal can cause cracks, particularly if the area is made of toughened glass. It is highly recommended to employ an experienced glass installer to install an e-cat flap on the pane. This will stop the glass cat flap installation near me from shattering or becoming fragile. A glazier will also provide you with a circular hole for the flap for your cat, which will be less likely to break and is safer for your kitty to use.
Cut the Hole
A good cat flap comes with a template that you can use to mark the spot on your door where the hole needs to go. If it doesn't, create your own by using a thin sheet of paper (tracing papers are great). Once the shape has been drawn on the door, you can utilize your spirit level to make sure that it is horizontal. This will ensure that the cat flap is positioned correctly in the door, and it will not open or close.
Next, make use of a jigsaw to cut out the pattern that is marked on the door. Make sure you are using a blade suitable for use on uPVC doors - usually it will be marked as such, if not ask the staff at the DIY store for guidance. Once the hole is made and the flap is placed against it and then open it, making sure that the flap moves smoothly. If it is bound at any point, use a file or rasp to fix this.
Also, make sure whether there are no electrical gas or cable lines within the door you'll be cutting into since they could be damaged by your Jigsaw. Additionally, you should be aware of any handles or other door fixtures that need to be removed to install the cat flap and be careful not to harm them in the process.
The majority of people who install a cat flap on their own will have an ordinary solid uPVC front door, meaning they won't be faced with these issues. But, if your door is made of wood or has a decorative panel that cannot be removed then this will add to the complexity of the task.
It is always worth seeking expert help from a cat flaps flap fitter when it comes to these types of jobs since it is crucial to get them done right to avoid possible issues in the future. If you do it wrong, it could cause the door to be damaged and may cause the warranty to be invalidated.
Install the Flap
Once you have cut your hole, place the flap to check if it opens and is able to fit. If you spot any areas which catch or stick to the wall, use a hand file or sandpaper to file them down until they fit perfectly and can be opened without issue. Make sure the flap sits in a flush position with the door.
If your kit doesn't include an example, you could make use of thin paper such as tracing or acetate. Place the paper on the door and draw a line to indicate where the flap should be placed (this will serve as your cutting guide). Mark four screw holes at each corner of the flap with the pencil marks you created on the door. These are the screw holes you'll need to use to fix it in place.
Most uPVC doors are solid and therefore simple to cut into. If the door is made of composite or GRP, it can be more difficult. If you're not familiar with this, it's recommended to consult an expert. They will also be able determine if your door is suitable to install an animal flap.
You can install a cat flap into composite doors. However, it's essential to check with the manufacturers or a professional joiner before you do so as any alterations to these doors may invalidate the warranty. If you decide to do the work yourself, bear in mind that this can be a messy job and may even be hazardous.
For composite doors, you'll typically require a saw or grinder to cut through the door panel itself rather than just through the GRP. Be aware that this could be very dangerous and you'll need to take great care not to hurt the door or yourself as it is very fragile. It's also worth noting that cutting a hole into any type of glass for a door is a lot more difficult than making the same change in a uPVC or solid wooden door.