Fitting Cat Flap In UPVC Door Panel

Cat flaps allow your pet to go inside and out as they please without you needing to let them in or out. They also can help stop your cat from urinating inside the home.

It is much easier to put the cat flap on a Upvc panel than on a glass one but you'll need some skills and the right tools.

Measure the Door

Installing a cat flap on the door can be a challenge however, as long as you select the right kind of cat flap installer flap make sure you take your time and follow the directions provided, it should not prove to be too much trouble. We will be showing you how to draw the shape, then use an jigsaw for cutting out the area in the door and then finish off the job by attaching the cat flap to the door. This will ensure that the flap stays in place and protects the door from wind and rain damaging the door.

To determine the size of the cat flap that you require, measure your pet's width. This will allow you to choose a cat flap that is large enough for your pet to go into the home and exit without needing to open the door every time.

Once you have the measurements, you can mark where on the door the template should be positioned, usually, this is done using an X, but some kits include an illustration that outlines the location to drill, if yours does, then you can stick it to the door and use a pencil to draw around it. If your door has moulding or sill on the bottom of it ensure you have enough space as this will keep your cat safe and will prevent them from getting access to your home.

Set a square to ensure that you're cutting properly and to ensure the hole is a good rectangle shape. Once you are happy with this, you are able to start removing the remaining door material. Set the square with a ruler to ensure that you are cutting the material properly and that the hole is a rectangle shape. When you are satisfied with the result, you can take out the rest of the door material.

Draw a Line

The cat flap is a great method to let your pet out and in without worrying about them being a nuisance to a visitor, or leaving unwanted gifts in the home. It also stops draughts and helps to keep your home's temperature steady. Fitting a cat flap to your door can be a daunting task for those who haven't attempted it before. Many people call a professional joiner or carpenter to do the job. While this is certainly an option, it is possible to do the work yourself if you have the appropriate tools and follow the instructions carefully.

While this is much easier to do with a wooden door, it is still feasible in uPVC doors, though you should be careful to avoid damaging the doors since this could cause damage to the warranty. The first step is to measure the door, ensuring that it will fit the new cat flap. This isn't too difficult for the standard uPVC door, however you might need to take more care if using an alternative type of door since these can be more difficult to cut than solid uPVC panels.

The next step is to measure the height of your cat flap In upvc Door panel's belly. This is the height between the floor and the bottom of your cat's stomach. You'll need to locate a space on the door that allows your cat flap fitters to pass through comfortably. Once you have this information you'll need to mark out the area using a pencil and a spirit level to be sure that the hole you will make will be suitable for your cat.

Once you've marked the area, it's time to make the hole. You will require a jigsaw and it is important that you take your time in order to ensure that the cuts are clean and smooth rather than rough and uneven, as it could cause damage to your door. Wear safety glasses and a dust mask while using a Jigsaw. Inhaling sawdust is hazardous for your health. After you've cut the hole, you will require sandpaper to smooth the edges so that the cat flap is easily fitted into place.

Cut a hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit is quite difficult. If you are not very proficient in DIY, it's recommended to hire an expert to do the job for you. A mistake could not only look ugly, but also pose a security threat. It could allow cold air in when the cat is outside and hot air to escape when it is inside.

Mark the hole position on the door using an eraser and a spirit level. This will ensure that it is correctly positioned and runs flush with the rest of the door. Make sure to have sandpaper in your possession to smooth any rough edges.

Once the line has been marked you should cut out the hole with a jigsaw, remember to wear the appropriate safety equipment for working with a power tool. If you are concerned about the sound of the jigsaw, you can purchase an electric version that is much quieter and easier to use.

You should only remove the material required to make the cat flap. It is important to leave some extra material for the wall thickness of the flap. However cutting away too much could cause problems or even damage the door frame.

If the door is made of upvc and features a metal panel or frame, it may interfere with the microchip flap. In this scenario you'll need to create an extra-large hole to ensure that the metal doesn't touch the wall of the flap.

If you are fitting a cat flap in upvc door cost flap into the frame of a double glazed window with a metal frame, you will need to speak to a professional who will provide you with a new glass pane that already has the hole for the cat flap in it. This is less expensive than trying to fit a cat flap inside an existing pane that was not made specifically for this purpose.

Fit the Flap

Cat flaps let your pet come and go whenever they want, allowing them the ability to unwind inside the house whenever they want to. If you have an uPVC front door, it might be difficult to install a cat flap. This is especially true in the event that you don't own a glass panel that can be cut. If you're able to purchase and install a replacement half-glazed uPVC panel, it's possible to add the cat flap to these doors. It's not a simple matter of cutting holes in the door. You'll also have to take a few steps to ensure that it is safe.

A composite, upvc door panels with cat flap, or GRP door panel is typically made up of a flimsy plastic outer skin bonded to a soft polystyrene insulating core. The material is extremely fragile and care should be taken when cutting into it to avoid damaging. This type of door has a template can be used to cut the hole.

Once you have marked the position of the hole in your door, now it's time to fit the cat flap. You can purchase and install various models including basic push-button operated models to microchip-activated ones that allow only your pet. No matter which type of cat flaps you choose it's essential that your cat is able to utilize the flap with ease without getting stuck outside in the rain.

A circular fitting is superior than a square because circles can be cut more securely into glass. This is because square holes can make the glass more susceptible to cracking when drilling is applied to it. It's also a much safer choice to use since you're not at risk of drilling into toughened glass that might break and hurt your pet or your family. This is especially crucial if you have elderly or children in your home who could be injured by glass fragments.